Skip to main content
A design sheet draws your piece the way a development sheet looks on the bench: aligned views in fine pencil linework, a few dimension callouts in millimeters, and small labels for the metal, stone, and setting. Use it to brief a CAD modeler or show a client how a piece is put together.
A design sheet is a concept sheet, not a manufacturing drawing. Its measurements are indicative, and the views are drawn rather than projected from a 3D model, so they can differ slightly from one another. Have a jeweler or CAD modeler check every dimension before anything is cast.

​
How to ask

There’s no button — ask for a sheet in the Create chat, in your own words. For example:
  • “Sketch a plain peridot pendant as a CAD design sheet”
  • “Make a technical sheet of this”
  • “Draw up a development sheet with the measurements”
Asking for a sketch style (“a ring in a pencil-sketch style”) gives you an ordinary design drawn as a sketch, and asking to see a piece from another angle (“show it from the side”) gives you a photo-style view. A sheet is what you get when you ask for the drawings themselves.

​
What’s on a sheet

  • Views — for a ring: top, side, front, and three-quarter, plus a section on a new design. Pendants and other pieces get the views that suit them.
  • Dimension callouts — up to five key measurements in millimeters, such as the center stone size and band width.
  • Labels — the metal, stone, and setting.
  • A spec line in the reply — the same numbers in text, because an image can occasionally misdraw a digit.
A ring size, when one is shown, is an assumption unless you give it. Tell Tashvi the size, the stone dimensions, or the metal you need, and the sheet uses them.

​
New designs, this design, or each design

With a sheet on screen, keep talking — “make the band thinner” redraws the sheet with that change.

​
Where it works

Design sheets are on Create on the web. The mobile app doesn’t draw them yet.

​
Credits

A sheet costs the same as a design at your chosen quality tier.

​
When you need real measurements

A design sheet is where a piece is described, not where it’s measured. For a 3D model you can export, use Draft. For CAD built to measured dimensions, Parametric Studio is in Beta on Pro plans and above.

Design Blueprint

Pin down the stones, metal, and setting first, then ask for the sheet.

Draft

Turn a design into a 3D model you can export as STL.